Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic

Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic
Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic
Item# Shure-PGXD14-PG30
$479.00
Availability: Usually ships the next business day

Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic

Free Ground Shipping

Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic Features:

* PGXD1 transmitter with WA302 Instrument Cable Rugged, compact bodypack with belt clip and instrument cable 20Hz – 20kHz frequency range captures every nuance of your tone Power, mute, and battery status LED Up to 10 hours of continuous use from 2 AA batteries 200' (60m) operating range 26dB of continuously adjustable gain to match variable input levels PGXD4 Wireless Receiver 24-bit / 48kHz digital technology for incredibly accurate sound Automatic frequency selection locates a clear channel instantly One-touch sync automatically syncs the transmitter and receiver True digital diversity delivers rock-solid wireless signal reliability Up to 5 systems can be used at once 1⁄4" and XLR audio outputs Included padded carrying case for portability and protection PG30 Comfortable wireframe for secure fit Smooth, natural frequency response comparable to quality handheld microphones Reliable at temperature and humidity extremes



Shure PGXD14/PG30 Digital Wireless System with PG30 Headset Mic Specifications:

* PGXD1 transmitter/strong> Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain

Gain adjustment range: 26dB

Input impedance: 1MΩ RF

Output Level: 10 mW maximum (dependent on applicable country regulations)

Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")

Weight: 128g (4.5oz.) without batteries

Housing: Molded polycarbonate case

Power requirements:

Battery Life: Up to 10 hours PGXD4 receiver

Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")

Weight: 289g (10.2oz.)

Housing: ABS Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Ω load): -2.5dBV 1/4" connector (into 10000Ω load): +10 dBV

Impedance: XLR: 50Ω 1/4": 50Ω

Sensitivity: -102 dBm @ 10-5 BER

Image rejection: > 70dB, typical XLR output: Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Audio LED: Red: 2dB below clip Amber: 12dB below clip Green: 50dB below clip Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground PG30 Polar pattern: Cardioid ­(unidirectional) Output impedance: 1200Ω @1kHz Output level: -52dBV/Pa­(2.5­mV) Signal-to-noise ratio: 61dB,­ 1kHz­at­1­Pa Maximum SPL: 125dB Dynamic range (max.­SPL­to­A-weighted­noise­level): 92dB Output Noise: 33dB ­(typical,­ A-Weighted) Recommended Operating Voltage: +5VDC, ­10V­ max­ (pin­ 2­ to ­pin ­1) Polarity: Positive­ sound­ pressure ­on ­diaphragm­ produces­ positive­ voltage ­on ­pins­ 3 ­and ­4­relative­ to ­pin ­1­ (ground)­ on ­the ­mini­ TA4F ­connector Cable: 1.27­m­ (50") two-conductor­ shielded Connector: Mini ­TA4F Net Weight: 51.6­g ­(1.82­oz)