Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic

Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic
Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic
Item# Shure-PGXD2-SM86
$318.00
Availability: Usually ships the next business day

Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic

Free Ground Shipping

* PGXD2 Handheld Transmitter PGXD2 Handheld Transmitter Power, mute, and battery status LED

* Up to 9 hours of continuous use from 2 AA batteries

* 200" (60m) operating range

* 10dB of adjustable gain

* Lockable interface prevents accidental setting changes

* Rugged construction for reliable performance show after show

* SM86 microphone

* Condenser cartridge for studio quality sound

* Tailored frequency response for a clear reproduction of vocals

* Rugged construction withstands the rigors of touring sound

* Cardioid polar pattern minimizes unwanted background noise

* Excellent choice for stage monitors and personal monitors

* Built-in three-point shock mount minimizes handling noise

* Two-stage "pop" filter reduces wind and breath noise

Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic Specifications:

* PGX2 Handheld Transmitter

* Audio Input Level:

* +2 dBV maximum at 10dB position

* 8 dBV maximum at 0dB position

* Gain Adjustment Range: 10dB

* RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)

* Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")

* Weight: 290g (10.2oz.) without batteries

* Housing: Molded PC/ABS handle and battery cup

* Power Requirements: 2 AA size alkaline or rechargeable batteries

* Battery Life: > 8 hours (alkaline)

* SM86 microphone

* Transducer Type: Condenser (electret bias)

* Frequency Response: 50 to 18,000Hz

* Polar Pattern: Cardioid

* Output Impedance: 150Ω at 1 kHz

* Recommended minimum load impedance: 600Ω

* Sensitivity (at 1,000Hz):

* Open Circuit Voltage: -50 dBV/Pa (3.15 mV)

* (1 Pa = 94 dB SPL)

* Output Clipping Level: 1000Ω Load at 1,000Hz: +3 dBV (1.41V)

* Maximum SPL (at 1,000Hz): 1000 Ω load (1% THD): 147 dB

* Self-Noise: 23dB typical, A-weighted

* Dynamic Range (1000 Ω): 124dB (maximum SPL to A-weighted noise level

* Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)*

* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

* Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector

* Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3

* Current Drain: 5.2 mA

* Connector: Three-pin (XLR) professional audio

* Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille

* Net Weight: 278g (9.8oz)

* Environmental Conditions

* Operating: -18 to 60 C (0 to 135 F) (relative humidity >90%)

* Storage: -29 to 74 C (-20 to 165 F) (relative humidity >80%)